Click here to see the BOS white paper entitled, LANbada for SAA
Theory of Operation. This also includes a detailed description of each software
component of the system.
System Requirements
PC: 486-33 minimum; gateway PC must be dedicated
Memory: 1 MB RAM
Disk Space: 840K on hard disk or network drive
DOS Version: 3.3 or higher
Host Connection: PC must have an operable connection to an AS/400 using a standard
APPC connection type: Twinax, SDLC, or 802.2 (Ethernet or Token Ring)
For LAN Connection: PC must be network-operable with either NetBIOS or IPX/SPX
For Async Connection: Up to two standard PC serial (COM) ports and/or up to 16
additional ports using optional multi-port serial adapters (25-pin male, D-type)
PC: 386DX minimum
Memory: 4 MB RAM minimum
Disk Space: 1.5 MB used; no hard disk is required for network installations
Windows Version: Windows 95 or Windows 3.x
For LAN Connection: PC must be network-operable with NetBIOS or IPX/SPX protocol
For Async Connection: Operable Async modem or ISDN terminal adapter
PC: 286 minimum
Conventional Memory: 25K conventional RAM required when using NetBIOS, 34K when
using IPX/SPX
Disk Space: Not required; 400K disk space required on either floppy or hard disk
drive for local installation; no hard disk is required for network installations
DOS: 3.3 or higher
For LAN Connection: PC must be network-operable with NetBIOS or IPX/SPX protocol
For Async Connection: Operable Async modem or ISDN terminal adapter
