|
|
Unmatched performance and reliablity for the
most demanding mission-critical applications
Reliablity: The Zebra Advantage
For nearly 30 years, every Zebra printer has been designed, engineered and
constructed with quality and durability in mind. This ongoing dedication to excellence is
how we've earned our reputation for proven reliablity. Click on picture for specifications.
Your Zebra printer will deliver the results you expect: enhanced
productivity, minimal maintenance, and a lower cost of ownership. We even back up every
product with a 12-month printer warranty and 6-month printhead warranty, with no
limitation on inches printed.
Common applications:
 | Chemical drum labels |
| Large paper roll labeling |
| Clinical lab label sets |
| Primary metal standard labels |
| ODETTE labels for the automotive industry |
| Banner-sized labels |
| Pallet and shipping labels |
| Container labels |
| Multiple-across labels |
Zebra Service & Support
Owning a Zebra printer opens the door to a myriad of resources, giving you ready access to
information, advice and answers
| Superior documentation |
| Dedicated technical support line |
| Worldwide network of certified service providers |
Expert assistance is as close as your phone or fax. And with Zebra's
Internet Product Support (ZIP Support), interactive technical support is only a click
away. All day, everyday.
Click
here for more information on the Zebra 105se Thermal Bar Code Label Printer
Printing Specifications
| Thin film printhead with Energy Control |
| Thermal transfer or direct thermal printing:
 | standard 203 dots/inch (8 dots/mm); |
| optional 152 dots/inch (6 dots/mm) or 300 dots/inch (12 dots/mm)
resolution |
|
| Maximum print width: 4.09"(104mm) |
Media Dimensions
| Minimum label width: 0.79" (20mm) |
| Maximum label width: 4.52" (115mm) |
| Minimum label length: 0.5" (12mm) in rewind and peel modes,
0.63" (16mm) in tear- off mode, and 1.5" (38mm) in cutter mode |
| Maximum print length:
16.0" (406mm) 300dpi
(w/std. mem.) 12.0" (304mm) 203dpi
(w/std. mem.) 22.0" (558mm) 152dpi |
| Total thickness (label and liner): 0.003" (0.076mm) to 0.012"
(0.304mm) |
| Maximum label roll diameter(OD): 8.0" (203mm) |
| Media core inside diameter: 3.0" (76mm) |
| Standard transmissive media sensing (label gap/notch) |
Ribbons
| Maximum outside diameter: 3.2" (81mm) |
| Ribbon core inside diameter: 1.0" (25.4mm) |
| Width range: 0.79" (20mm) to 5.31" (134.8mm) |
Print Speeds
| Programmable constant printing speeds of 2" (51mm), 3" (76mm),
4" (102mm), 5" (127mm) and 6" (152mm) per second |
| Speeds with optional 300dpi printhead are 2.4" (61mm), 3"
(76mm) and 4" (102mm) per second |
Printer Programming Options
| ZPL II or ZPL (selectable through software) |
| Zebra printer driver for Windows operating system |
| BAR-ONE Windows-based WYSIWYG on-screen label design application software
|
| PC-470 print controller with keyboard and display for stand-alone
applications |
Fonts
| 7 bitmapped, 1 scalable (CG Triumvirate Bold Condensed) |
| IBM Code Page 850 International Characters |
| Optional fonts: available on EPROM as scalable or smooth bit-mapped fonts
in standard, bold, italic and bold italic |
| Futura, CG Triumvirate Condensed, CG Palacio, CG Times or Univers
character sets |
Bar Codes/Symbologies
| Code 11 |
UPC-A, UPC-E |
Industrial 2 of 5 |
| Code 39 |
EAN-8, EAN-13 |
LOGMARS |
| Code 93 |
Plessey |
Postnet |
| Code 128 with subsets A/B/C and UCC Case Codes |
Interleaved 2 of 5 |
EAN and UPC with 2 or 5 digit supplements
|
| Codabar |
Standard 2 of 5 |
MSI |
| ISBT 128 |
|
|
|
|
|
| 2-D Symbologies |
|
|
| CODABLOCK |
PDF417 |
Code 49 |
| Maxi Code |
Datamatrix |
QR Code |
Electronics
| 32-bit microprocessor |
Electrical
| Switch selectable 115 VAC +15/-20%, |
| 5 amp fused; 230 VAC +/-15%, 3 amp fused (48-62Hz) |
Communications Interface
| Centronics parallel or RS-232C serial ports, 110-19.2kB configurable BAUD
rate, parity, data bits, XON-OFF/DTR protocol |
Physical
| Height: 15.4" (391mm) |
| Width: 10.5" (267mm) |
| Depth: 18.9" (480mm) |
| Weight without options: 43 lbs (19.5kg) |
Environment
| Operating temperature: 41°F (5°C) to 104°F (40°C) |
| Operating humidity 20-85% non-condensing |
| Storage/transportation: -40°F (-40°C) to 158°F (70°C), 20% to 85%
non-condensing R.H. |
Options
| Label peel and liner rewind (for print-and-apply) |
| Rewind (full label roll is rewound internally) |
| Memory (standard 0.5 MB DRAM expand-able to 1MBstandard with 300dpi
option) |
| High-performance cutter cuts full-width media, under software control
(not compatible with rewind and peel options) |
| Printhead 152.4 dots-per-inch (6 dots/mm) resolution |
| Printhead 300 dots-per-inch (12 dots/mm) resolution |
| Internal Fan-fold Media Supply Bin (not compatible with internal rewind
or peel options) |
| Additional scalable and smooth bit-mapped fonts |
| Reflective (black mark) media sensor (in addition to standard
transmissive sensor), switch selectable |
| BAR-ONE label
design software |
|
|
