I-O 5794ip Twinax Controller Support up to 14 Twinax Devices Over a TCP/IP Connection

Connects Twinax display stations and printers to an AS/400-iSeries
via an Ethernet LAN

Overview

The I-O 5794ip Twinax Controller connects IBM and IBM compatible Twinax display stations and printers to an AS400-iSeries host via TCP/IP over an Ethernet LAN. The I-O 5794ip is ideal for those who are migrating their AS/400-iSeries to an Ethernet environment.

Reliable Twinax displays and IPDS/SCS printers can operate in an Ethernet
environment

Eliminates the need for expensive IBM Twinax Work Station Controllers

In locations requiring remote access, the I-O 5794ip replaces expensive remote
controllers

No need for high-priced leased lines or expensive DSU/CSU modems

No re-cabling – continue to utilize existing Twinax or twisted pair cabling

Supports up to 56 logical sessions (4 sessions per device)

Supports up to 4 AS/400-iSeries hosts

Supports TN5250e, SNA and AnyNet

Easy to install

Click here for more information on the 5794ip Controller

Specifications

• General
- Attaches up to 14 Twinax displays and printers
- Star Panel compatible (Maximum 7 devices)
- Supports up to 4 hosts
- Allows up to 4 sessions per Twinax address
- Supports TCP/IP (TN5250e, AnyNet) and SNA
protocols

• Host Systems and Requirements
- AS/400-iSeries
- OS400 V3R2 and newer
- TCP/IP
- Telnet services

• Display Stations
- All 5250 Twinax display stations
- Display model type is matched to Telnet models:
5251m11, 5291-1, 5292-2,
3180-2, 3179-2, 3196-A1, 3477-FG,
3477-FC (InfoWindow II and Extended Character
Attributes not supported)

• Printers
- All 5250 SCS and IPDS Twinax printers
- TN5250e – host configures all SCS printers as 3812-1
(IPDS printers are not supported under TN5250e)
- AnyNet – host recognizes the printer’s model type
- SNA – host recognizes the printer’s model type

• Data Streams
- TN5250e, auto configuring local and remote
connectivity (SCS)
- AnyNet, auto configuring local and remote connectivity
(IPDS and SCS)
- SNA, auto configuring local connectivity (IPDS and
SCS)

• Network
- 10/100 BaseT auto-sensing
- TCP/IP (TN5250e, AnyNet)
- DHCP client
- SNA (APPC)
- Ethernet (IEEE 802.2, 802.3)

• Ports
- RJ45 for Ethernet
- DB9 for Twinax Dual-Phase “V”
Connector (cable included)
- DB25 parallel for diagnostic printouts

• Approvals
- Logic Unit – FCC 15, CE
- Power Supply – UL, CE

• Power Supply
- Input – 110 to 240 volt AC auto-ranging
- Output – 5 volt DC, 2.5 amp (shield
grounded)

• Physical
- 8-7/16 x 5-9/16 x 1-3/8 inches
(21.5 x 14.1 x 3.5 cm)
- 14.3 ounces (405 grams)
- Temperature range +40 to 100 F
(5 to 42 C)
- Relative humidity 10% to 90%, non-
condensing

Click here for more information on the 5794ip Controller

Additional Features

Features	Benefits
Investment Protection	When installing an Ethernet LAN that is attached to an AS/400–iSeries, reliable Twinax displays and IPDS/SCS printers can operate in the new Ethernet environment maintaining the usefulness of the equipment
Eliminates the Need for Twinax Work Station Controller	A significant saving is realized by installing an I-O 5794ip Twinax Controller instead of an expensive IBM Twinax Work Station Controller
No IBM Remote Controller Required	When remote access to an AS/400–iSeries is required, an expensive IBM or IBM compatible remote controller is replaced by an economical I–O 5794ip Controller
No Leased Lines or Expensive Modems	When communicating to a remote site, there is no need to spend valuable resources on high-priced leased lines and special modems.
No Re-cabling	The I-O 5794ip allows Twinax displays and printers to be connected to existing Twinax or twisted pair cabling eliminating the expense of re-cabling
Multiple Protocols	Supports the auto configuring TN5250e and AnyNet for remote locations or SNA for a local attachment
Multiple Host	Supports up to 4 hosts
Multiple Sessions	Up to 4 sessions per physical device can be configured – Up to 56 logical sessions supported

I-O Corporation 5794ip Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me
My Need is: Immediate 30 Day 60 Day 90 Day

I'm Interested In Information on:
Type of AS400/Mainframe/System:

Name
Title
Company
Address 1
Address 2
City, State/Province	,
ZIP/Postal Code
Country
E-mail
Phone	Ext.
FAX


How did you hear about this product ?

I-O 5794ip Twinax Controller Support up to 14 Twinax Devices Over a TCP/IP Connection

Connects Twinax display stations and printers to an AS/400-iSeries via an Ethernet LAN

Overview

Specifications

Additional Features

I-O Corporation 5794ip Information Request Form

I-O 5794ip Twinax Controller
Support up to 14 Twinax Devices
Over a TCP/IP Connection

Connects Twinax display stations and printers to an AS/400-iSeries
via an Ethernet LAN